|
-Transport belts and troughed belts for all kinds of bulk material-
We meet the high material requirements for bulk material transport with high-quality components and the high quality standard of our production. The result are high-performance and reliable conveying solutions built for trouble-free longterm operation while running at a minimum energy consumption.
We design and construct all kinds of belt conveyors for bulk material transport.
Technical specification:
In belt conveyors with sliding belt the belt runs on a continuous steel sheet. Special belts with a high gliding ability ensure a wear-resistant and energy-saving transport.
In troughed conveyors and roller conveyors, the belt advance and reverse are realised partly or wholly over rollers.
All belt conveyors are available with special equipment as: explosion protection, operation monitoring system, hydraulic tensioning system, scraper, cleaning brush, rip cord for emergency-off as well as belts with various profiles.
The selection of the conveyor belt profile depends among others on the goods to be conveyed and possible angles of inclination or slope of the belt conveyor.
Model examples:
Type RE-TB 1000x3000 - with gliding belt-
 Automatically reversing distributor belt.
Conveying capacity: | up to approx. 100 m3/h
depending on the kind of material and humidity | Belt width: | 1.000 mm | Advance: | approx. 30m/min | Required power: | approx. 2.2 kW | Weight TB: | approx. 580 kg |
Application: distribution of chipped bark above a bark box with discharge via push floor.
Type RE-TB -Emergency Feed Bunker-
-Belt Conveyor with support rollers-
Distributor belt for chips above a screening system.
Conveying capacity: | up to approx. 70 m3/h
depending on the kind of material and humidity | Belt width: | 800 mm | Advance: | ca. 25 m/min | Required power: | approx. 3.0 kW | Weight TB: | approx. 2,300 kg/m |
Modular design with flat geared motor.
Type RE-TB 1000x3750 - with gliding belt-
Distributor belt for chips above a screening system. Conveying capacity: | up to approx. 100 m3/h
depending on the kind of material and humidity | Belt width: | 1,000 mm | Advance: | approx. 40 m/min | Required power: | ca. 3 kW | Weight TB: | approx. 750 kg |
Bevel gear drive for moving the TB above a screening system.
Type RE-TB 1440x6650 - with gliding belt-
Conveyor belt for the take-over and transport of bark and saw chips.
Conveying capacity: | up to approx. 120 m3/h
depending on the kind of material and humidity | Belt width: | 1,440 mm | Advance: | approx. 55 m/min | Required power: | 5.5 kW | Weight TB: | approx. 2,800 kg |
Specially coated conveyor belts, easy sliding, resistant to wear and with long serviceable life.
Type RE-MB 800x17000 - Belt Conveyor with support rollers -
Troughed conveyor belt with very high conveying capacity for all kinds of bulk material.
Conveying capacity: | up to approx. 180 m3/h
depending on the kind of material and humidity | Belt width: | 800 mm | Advance: | approx. 70 m/min | Required power: | 11 kW | Weight TB: | approx. 3,500 kg |
Little wear of the transport roller bearings.
Type RE-RB 650x9000 - Belt Conveyor with support rollers -
Belt drive station.
Conveying capacity: | up to approx. 50 m3/h
depending on the kind of material and humidity | Belt width: | 650 mm | Advance: | approx. 70 m/min | Required power: | 1,5 kW | Weight TB: | approx. 1,500 kg |
Support rollers of the carrying run / lateral guiding rollers.
|
