|
-Compulsory conveying of bulk material-
Above all, worm feeders serve to discharge saw chips and chips. However, the mature technology of the drive and storage concepts enables the adaptation to virtually any application. According to the requirements it is possible to handle green refuse, bio refuse, saw chips, chips, bark, granules of all kinds, etc. The use of lids enables the invisible and virtually dust-proof conveying of bulk material. Here, too, explosion protection and other special equipment are available.
Model examples:
Type RE-FS 400x4800 -Special Model-
Very slow running worm feeder, serves for the take-over and transport of short metal filings. (in the metal-working industry)
Worm blade ø: | 400 mm | Conveying capacity: | approx. 5 solid m3/h | Required power: | 1.5 kW | Machine weight: | approx. 850 kg |
 Drive concept with extremely robust duplex chain.
Type RE-DFS 350x2500
The double worm feeder serves for the take-over and transport of fuel mixes in a biomass heating and power station.
Worm blade ø: | 350 mm | Conveying capacity: | approx. 30 solid m3/h | Required power: | 2x5.5 kW | Machine weight: | approx. 1,100 kg |
Opposed spirals for compulsory conveying
Type RE-TFS 200x3500
Triple worm feeder for the discharge of chips below a drum chipper. Worm blade ø: | 3x200 mm | Conveying capacity: | approx. 35 solid m3/h | Required power: | 3.0 kW | Machine weight: | approx. 1,000 kg |
Type RE-QFS 150x3000
Quadruple worm feeder for the discharge of chips below a drum chipper.
Worm blade ø: | 4x150 mm | Conveying capacity: | approx. 40 solid m3/h | Required power: | 3.0 kW | Machine weight: | approx. 950 kg |
Direct worm discharge into the trough of a chain conveyor.
|
